Skip to content

Corzan® CPVC for Tank Lining and Fabrication

The ability to bend, shape and weld sheet made from Corzan CPVC enables its use in a wide variety of process applications including tanks, scrubbers and ventilation systems.
Tank_960x960

Webinar: Corzan CPVC Tower Packings, Tanks, and Other Fabricated Components

In this free webinar recording, hear the experts discuss ISO-based information on Corzan CPVC’s fire and smoke characteristics, cost effectiveness and more.
ACCESS THE WEBINAR

Corzan CPVC Sheet, Liner and Fabricated Products

 

The superior corrosion resistance and high temperature performance of Corzan® CPVC is available in 48 x 96-inch sheets. Corzan CPVC sheet products are available in thicknesses ranging from 1/8-inch to 3 inches and are either extruded or compression-molded. The ability to bend, shape and weld sheet made from Corzan CPVC enables its use in a wide variety of process applications including tanks, scrubbers and ventilation systems.

Sheet made from Corzan CPVC can readily be overwrapped with Fiber Reinforced Polyester (FRP), if necessary, and fabric-backing is not needed to achieve proper adhesion between the CPVC and FRP.

There are a variety of products made from Corzan CPVC that can be used in various industrial applications including:

  • Tanks
  • Tank lining
  • Ventilation and scrubber equipment
  • Pumps
  • Filters
  • Tower Packing
  • Rods and Shapes
  • Special Valves
  • Special Fittings
  • Custom Molded Parts

Where Corzan CPVC Is Used

Corzan CPVC is an ideal choice for certain Tank Lining and Fabrication applications in:

Specification

Reference these codes when specifying Corzan CPVC for fabrication:

  • AWS G1.10M:2001: Guide for the Evaluation of Hot Gas, Hot Gas Extrusion and Heated Tool Butt Thermoplastic Welds
  • ASTM C 1147: Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
  • DVS 2207-3: Hot-Gas Welding of Thermoplastics - Sheets and Pipes
  • DVS 2207-3 Addendum: Hot-Gas Welding of Thermoplastics - Sheets and Pipes - Welding Parameters
  • DVS 2208-1: Welding of Thermoplastics - Machines and devices for the heated tool welding of pipes, pipeline components and sheets
CZNEW-two-column-single-tank-lining-specification

Installation

Corzan CPVC components can be fabricated with all the most common thermoplastic fabrication techniques.

CZNEW-two-column-single-tank-lining-installation

Contact a Corzan CPVC Specialist

Corzan CPVC is such a versatile material that there are untold fabrication, sheet and lining needs it can meet. What are yours? Get in touch with a Corzan CPVC specialist to discuss your tank lining and fabrication project.

CZNEW-tout-with-form-tank-lining

Submit the form and an expert will be in touch within one business day.